Key takeaways
- Pool type sets the starting range: vinyl liner is usually lowest, fiberglass in the middle and gunite highest.
- Decking, fencing, lighting, heating and landscaping can add a large share on top of the pool itself.
- Yard access, slope and clay soil affect excavation and site work.
- Running costs (power, water, chemicals, upkeep) continue after the build.
- Get two or three itemized written quotes and compare what each includes.
There’s no single price for a pool in Shreveport, and anyone who quotes one before seeing your yard is guessing. What you can know up front is what moves the number, so you can set a realistic budget and compare quotes properly.
Start with the pool type
The type of pool sets the starting range. Widely published national cost guides put typical installed prices for an average-size pool roughly in these ranges:
| Pool type | Rough national range (installed) | Notes |
|---|---|---|
| Vinyl liner | about $35,000 to $65,000 | Lowest start, liner replaced every several years |
| Fiberglass | about $45,000 to $85,000 | Fast install, lower upkeep, shapes set by the mold |
| Gunite (concrete) | about $55,000 to $120,000+ | Any shape or size, longest build, periodic resurfacing |
These are broad national figures, not Shreveport quotes. Local pricing depends on the builder, materials and your site. Use them for planning only.
What pushes the price up or down
Size and shape
A bigger pool means more digging, material and finish. Free-form shapes, tanning ledges, benches and deep ends add to the price.
Your yard
Access matters. If an excavator can’t easily get into the backyard, work slows and costs rise. Sloped lots may need retaining walls. Clay soil, common around Shreveport, can call for extra base preparation and drainage.
Decking and fencing
These are often the biggest surprise. A larger deck, stamped concrete, pavers or travertine, and a code-compliant safety fence can add a big share to the total.
Features and equipment
Lighting, heaters, automatic covers, salt systems, water features and automation each add cost. They also change how much the pool costs to run.
Permits and HOA
Permit fees and any HOA review add a little cost and some time. Most builders handle the permit and include it in the quote.
Don’t forget running costs
After the build, budget for electricity to run the pump, water to top it off, chemicals, routine cleaning and occasional repairs. Variable-speed pumps and automation can bring the power bill down.
How to compare quotes
Get two or three quotes, then check each one for:
- Pool size, depth and type
- Interior finish
- Decking material and square footage
- Fencing, lighting, heating and covers
- Permits, excavation, soil hauling and electrical
- Warranty terms
- Payment schedule and timeline
The lowest total is not always the cheapest once you account for what’s missing. Ready to get real numbers for your yard? Request a free quote or read more about pool installation.
Frequently asked questions
What's the cheapest type of inground pool?
Vinyl liner pools usually have the lowest starting price. Keep in mind the liner needs replacing every several years, which adds to the long-term cost.
Does fiberglass or gunite cost more over time?
Gunite usually costs more up front and needs resurfacing every so often. Fiberglass tends to have lower upkeep. Which comes out ahead depends on size, features and how long you keep the pool.
Why do quotes for the same pool vary so much?
Quotes often include different things. One may include the deck, fence and lights while another doesn't. Line up quotes item by item before comparing totals.
Can I finance a pool?
Many homeowners do, through the builder's lending partners, a home equity loan or a personal loan. Ask the builder what they offer.